Victron Lynx Smart BMS 500 NG (M10)

SKU: LYN034160310

LYN034160310

Victron Lynx Smart BMS 500 NG (M10)

The Lynx Smart BMS NG is an advanced Battery Management System (BMS) specifically designed for Victron Lithium NG batteries. These batteries, built with Lithium Iron Phosphate (LiFePO4) technology, come in 12.8 V, 25.6 V, and 51.2 V variants with multiple capacity options.

These batteries can be configured in series, parallel, or series-parallel combinations to build battery banks with system voltages of 12V, 24V, or 48V. A single system can include up to 50 batteries, offering a maximum energy storage capacity of 192kWh in a 12V setup and up to 384kWh in 24V and 48V configurations. For more detailed information, visit the Victron Lithium NG battery product page.

Seen a better price?
Login to see Trade Prices
  • Manufacturer Victron Energy
  • Commodity Code 85369010
  • Dimensions (mm) (H x W x D) 190 x 300 x 90

Built-in 500 A or 1000 A contactor

  • Available in 500 A (M10) and 1000 A (M10) versions.
  • Acts as a secondary safety system to protect the battery in case primary controls (ATC, ATD and/or DVCC) fail.
  • Suitable as a remote controllable main system switch.

Pre-charge circuit

  • Prevents high inrush currents when connecting capacitive loads like inverters.
  • Eliminates the need for external pre-charging devices.

Monitoring and control

  • Bluetooth connectivity for monitoring and control via the VictronConnect App or VE.Can connectivity in combination with GX devices such as the Cerbo GX or Ekrano GX and the VRM portal.
  • Readout of cell voltages and temperatures also on GX devices and the VRM portal.
  • Built-in battery monitor provides data such as state of charge, voltage, current, historical data, status info and more in real time.

Diagnostic at a glance with Instant Readout DVCC closed loop control as well as ATC/ATD contacts

  • Compatible Victron inverter/chargers, the Orion XS 12/12-50A DC-DC battery charger and solar charge controllers are automatically controlled via a connected GX device and DVCC.
  • ATC/ATD contacts can be used to control other chargers and loads that have a remote on/off port.

Programmable relay

  • Can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable).
  • Features Alternator ATC mode for safe alternator disconnection before battery disconnects

AUX terminal

  • Onboard auxiliary power supply (1.1 A @ system voltage) for powering specific loads (i.e. a GX device) post-BMS shutdown.
  • Automatic shutdown of BMS and AUX connection if no charge voltage detected within 5 minutes after a low voltage event

VE.Can and NMEA 2000 data communication

  • Easy connection and communication with GX devices via VE.Can using a standard RJ45 network cable.
  • Integration into marine networks via NMEA 2000 protocol (requires a VE.Can to NMEA 2000 micro-C male cable).

Lynx Distributor fuse monitoring

  • Monitor fuse status of up to 4 connected Lynx Distributors via VictronConnect or GX devices.
  • Receive alarms in case of blown fuses.