DMEGC Solar 595W Infinity 144 Cut Bi-Facial Dual Glass N-type Mono Solar Module - Silver Frame/White Backsheet

• Manufacturer DMEGC Solar

DMEGC’s DM595M10T-B72HSW Infinity is a 595W N-type bifacial dual-glass solar module aimed at commercial rooftops and larger installations where high power density and long-term reliability matter. It delivers up to 23.2% efficiency, helping you hit target system sizes with fewer panels and potentially lower balance-of-system costs.

Using a 144 half-cut N-type mono cell layout, the module is designed for stable performance and strong energy yield. Electrical ratings from the datasheet include Vmp 44.42V, Imp 13.42A, Voc 53.10V, and Isc 14.17A (STC). It supports 1500V DC systems and uses an IP68 junction box with 3 diodes.

Because it’s bifacial (rear-side contribution supported, with bifaciality stated at 80% ±5%), it can generate extra energy where there’s good rear reflection—such as light-coloured surfaces, membranes, and ground-mount sites. The dual-glass construction (2mm front and 2mm rear heat-strengthened glass) is intended to improve durability and environmental resistance.

For installers, it’s built to handle tough site conditions with maximum mechanical test loads of 5400Pa on the front and 2400Pa on the rear (design loads 3600Pa front / 1600Pa rear). Operating temperature range is -40°C to +85°C, and the temperature coefficient of maximum power is -0.29%/°C, supporting stronger output in warmer conditions versus older module designs.

Warranty coverage is geared for long service life: 15-year product warranty and 30-year linear power warranty, with the datasheet stating ≤1% first-year degradation, then ≤0.4% per year, reaching 87.4% at year 30. The module is listed as compliant with major IEC standards (including IEC 61215 and IEC 61730) and includes additional environmental and reliability testing references (e.g., salt mist, ammonia corrosion, dust & sand, LeTID).